Dialup
Router feature is not turned on.
VPN
DHCP Scope 192.168.11.50 to 192.168.11.60
The default filters are:
Inbound filters
Source Address |
Source Network Mask |
Destination address |
Destination mask |
Protocol |
Source port |
Destination port |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
47 |
Any |
Any |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
50 |
Any |
Any |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
TCP[Established] |
1723 |
Any |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
TCP |
Any |
1723 |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
UDP |
Any |
500 |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
UDP |
Any |
1701 |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
UDP |
Any |
4500 |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
TCP |
Any |
443 |
|
|
|
|
|
|
|
Outbound Filters
Source Address |
Source Network Mask |
Destination address |
Destination mask |
Protocol |
Source port |
Destination port |
192.168.11.7 |
255.255.255.255 |
Any |
any |
47 |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
Any |
any |
50 |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
Any |
any |
TCP |
1723 |
Any |
192.168.11.7 |
255.255.255.255 |
Any |
any |
TCP |
Any |
1723 |
192.168.11.7 |
255.255.255.255 |
Any |
any |
UDP |
500 |
Any |
192.168.11.7 |
255.255.255.255 |
Any |
any |
UDP |
1701 |
Any |
192.168.11.7 |
255.255.255.255 |
Any |
any |
UDP |
4500 |
Any |
192.168.11.7 |
255.255.255.255 |
Any |
any |
TCP |
443 |
Any |
|
|
|
|
|
|
|
To allow http://192.168.11.254/ traffic,
Add an inbound filter:
Source Address |
Source Network Mask |
Destination address |
Destination mask |
Protocol |
Source port |
Destination port |
192.168.11.254 |
255.255.255.255 |
192.168.11.7 |
255.255.255.255 |
TCP |
80 |
Any |
Add an outbound filter:
Source Address |
Source Network Mask |
Destination address |
Destination mask |
Protocol |
Source port |
Destination port |
192.168.11.7 |
255.255.255.255 |
192.168.11.254 |
255.255.255.255 |
TCP |
Any |
80 |
To allow http://www.google.ca/ traffic, you must open http port and DNS ports.
Add an inbound filter:
Source Address |
Source Network Mask |
Destination address |
Destination mask |
Protocol |
Source port |
Destination port |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
TCP |
80 |
Any |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
TCP |
53 |
Any |
Any |
Any |
192.168.11.7 |
255.255.255.255 |
UDP |
53 |
Any |
Add an outbound filter:
Source Address |
Source Network Mask |
Destination address |
Destination mask |
Protocol |
Source port |
Destination port |
192.168.11.7 |
255.255.255.255 |
Any |
Any |
TCP |
Any |
80 |
192.168.11.7 |
255.255.255.255 |
Any |
Any |
TCP |
Any |
53 |
192.168.117 |
255.255.255.255 |
Any |
Any |
UDP |
Any |
53 |
Configure LinkSys WRT54GS Wireless Router to pass inbound VPN request:
PPTP |
TCP 1723, UDP 1723 |
L2TP |
TCP 1701, UDP 1701 |
VPN Client
Set up a VPN connection and connect it to VPN server
Modify the VPN connection so that Internet traffic will not route to VPN server.
Click Properties button
Click Advanced … button
From VPN Client, the share folder on VPN server can be accessed by \\192.168.11.50\share.
L2TP connection with preshared key
VPN Client
Click “Advanced Settings”
My LinkSys Router does not support L2TP/IPSec. I have to practice L2TP/IPSec without router.
The default policy allows VPN Clients to access full network.
